Your cart is currently empty!
Tag: ios-xe
-
Configuring D-VTI and S-VTI for Hub & Spoke Deployments
In this post, we’re going to configure D-VTI and S-VTI between two CSR1000v routers to demonstrate hub and spoke deployments. The two devices used as shown in the topology below are R9 and R10. R9 will act as the hub and R10 will act as a spoke. Topology Devices R9…
-
Configuring IPSec Site-to-Site VPN’s using IOS-XE as a CA Server
In this post, we’re going to configure an IPSec site-to-site VPN with two CSR1000v routers. The authentication between the two routers will be performed using digital certificates issued from a separate Cisco CSR1000v router which is acting as a CA server. Topology Devices R12 – CA Server Configuration Configure Domain…
