Video: I Failed my CCIE Security Lab | 5 Tips to Increase Your Chances of Success
https://youtu.be/qVhbPc4SIAs
0 Comments
19/05/2022
Photo by Christina Morillo on Pexels.com
Configuring D-VTI and S-VTI for Hub & Spoke Deployments
In this post, we're going to configure D-VTI and S-VTI between two CSR1000v routers to demonstrate hub and spoke deployments. The two devices used as shown in the topology below…
01/05/2022
Photo by Christina Morillo on Pexels.com
Configuring IPSec Site-to-Site VPN’s using IOS-XE as a CA Server
In this post, we're going to configure an IPSec site-to-site VPN with two CSR1000v routers. The authentication between the two routers will be performed using digital certificates issued from a…
30/04/2022
Photo by Christina Morillo on Pexels.com
Configuring FlexVPN Point-to-Point IKEv2 S-VTI with PKI Authentication
In the last post, we explored how to configure FlexVPN point-to-point IKEv2 S-VTI's with preshared keys. In this post, we will do the same but this time using another CSR1000v…
29/04/2022
Configuring FlexVPN Point-to-Point IKEv2 S-VTI
In this article, we're going to configure a point-to-point IKEv2 Static Virtual Interface (S-VTI) between two Cisco CSR1000v routers using pre-shared keys as the authentication method. To demonstrate this, we're…
28/04/2022
Photo by Lukas on Pexels.com
Photo by Pixabay on Pexels.com
Video: Configuring Cisco ASA IKEv2 Site-to-Site VPNs
https://youtu.be/8T-Vdz5fMIw ASA Configuration ASAv2 Omitted Configuration asa2# show run : ASA Version 9.12(3) ! hostname asa2 ! interface GigabitEthernet0/0 nameif outside security-level 0 ip address 172.16.1.1 255.255.255.0 ! interface GigabitEthernet0/1…
15/09/2021
Photo by Julia M Cameron on Pexels.com
