Cisco ISE Device Administration using TACACS+ -

Cisco ISE Device Administration using TACACS+

Post author:iwiizkiid
Post published:18/11/2019
Post category:Uncategorized
Post comments:0 Comments
Post last modified:02/02/2021
Reading time:7 mins read

In this article, I will cover network device administration using TACACS+ on Cisco’s Identity Services Engine. Accompanied with a video demonstration, I will also list the TACACS+ configuration required for Cisco’s ASAv.

Configure the Network Device/s

In the video demonstration, I have used the ASAv as the network device I would like ISE to administer. Follow the steps below to configure the ASAv.

aaa-server TACACS+ protocol tacacs+ (configures TACACS+ to be used with aaa)

aaa-server TACACS+ (DMZ) host 10.1.1.10 (tells the ASAv which interface ISE can be reached)

key Cisco123 (enter your TACACS+ key)

aaa authentication enable console TACACS+ LOCAL (authenticates enable prompt via TACACS+ with LOCAL authentication as fallback)

aaa authentication ssh console TACACS+ LOCAL (authenticates ssh via TACACS+ with LOCAL authentication as a fallback)

aaa authentication telnet console TACACS+ LOCAL (authenticates telnet via TACACS+ with LOCAL authentication as a fallback)

aaa authentication serial console TACACS+ LOCAL (authenticates serial via TACACS+ with LOCAL authentication as a fallback)

ciscoasa(config)# show run | include aaa (verify configuration)

Configure Cisco ISE

Navigate to: Administration >>> System >>> Deployment

Edit your node and check the box ‘Enable Device Admin Service’.

NOTE: As mentioned in the video demonstration, this is a licensed feature.

Navigate to: Administration >>> Network Resources >>> Network Devices

Navigate to: Work Centers >>> Device Administration >>> Policy Elements >>> (Left-hand pane) Results >>> TACACS profiles

Navigate to: Work Centers >>> Device Administration >>> Policy Elements >>> (Left-hand pane) Results >>> TACACS Command Sets

Navigate to: Work Centers >>> Device Administration >>> Device Admin Policy Sets

Verify Functionality

Navigate to: Operations >>> TACACS >>> Live Logs

Additionally, if you would like to enable command authorization, you can use the following configuration below.

Note: If command authorization is implemented wrong, you could end up locking yourself out of your devices.

Enabling Authorization

aaa authorization command TACACS+ LOCAL (allows command authorization to be configured for all administrators on all consoles)

aaa authorization exec authentication-server (uses the authenticating servers)

Tags: Cisco, Cisco Device Administration, Cisco ISE, Device Administration, ISE, ISE TACACS, TACACS Device Administration, tacacs+

iwiizkiid

Kelvin is a Cyber Security professional with years and experience working with organisations in different verticals, both large and small. He enjoys contributing to the Network Wizkid knowledge base and he also creates technical content. Kelvin enjoys learning new things and often does this by working on achieving new technical certifications. He holds many professional certifications and academically, he had achieved a Bachelors and Master's degree in both Computer Networks and Cyber Security.