Remote Access VPN Authentication with Cisco ISE

In this article I will walk through the steps that are required to configure the ASA for external authentication using Cisco ISE for remote access VPN users. This demonstration will use the following devices: Cisco ISE 2.4Cisco ASA 9.8Cisco AnyConnect…

KT Labs EP2 :: Getting Started with the ASA & ASDM

In this knowledge transfer session, I show you how to configure basic settings on the Cisco Adaptive Security Appliance (ASA) and how we can manage the ASA using the Adaptive Security Device Manager (ASDM). Please see the video below;  …

Cisco :: Configure ASAv To Use Virtual Serial Ports

In this article, I will demonstrate how to configure the ASAv so that you use a virtual serial port. This article assumes that you have installed the virtual Cisco Adaptive Security Appliance using VMware workstation or it's equivalent and that you…

Cisco :: FXOS Authentication Using TACACS

In this article, I will describe how to enable authentication and authorization for Firepower eXtensible Operating System (FXOS) devices. The use case presented in this document illustrates how Cisco Identity Services Engine (ISE) can be utilised with attribute-value pairs (AV-Pairs)…

Cisco :: Configuring Smart License Software

In this article, I would like to demonstrate how to configure Cisco Smart Licensing on the virtual Cisco Adaptive Security Appliance (ASAv). This post assumes that readers already have access to there own Smart Account and would like to know…

CCIE Security v5 :: ASA Packet Processing Post 8.3 Code

In this article, I will share my notes on the ASA packet process for version 8.3+. Domain 1.0 off the CCIE Security version blueprint focuses on perimeter security and intrusion prevention, both of which include the ASA. In order to understand…

Cisco :: ISE 2.3 Device Administration using TACACS+

In this article, I will cover network device administration using TACACS+ on Cisco's Identity Services Engine. Accompanied with a video demonstration, I will also list the TACACS+ configuration required for Cisco's ASAv. Configure the Network Device/s In the video demonstration,…

Cisco :: Configuring ASAv Active/Standby Failover

In this article, I will share the configurations used in the within the video below. The configurations enable one to configure Active/Standby ASA's with failover and redundant failover links. I have included the topology below as a reference.   ASAv1…